MiBoxer C3 CCT LED Remote with Sliders, 2.4GHz, Magnetic Base, Black or White
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The C3 is a CCT remote with sliding controls — one slider for brightness, one for colour temperature. No menus, no zone buttons: you set the light by moving a finger, which is the closest thing to a physical dimmer in this range. Magnetic base, black or white.
Which Controllers Does It Work With?
- Our 2-in-1 CCT controllers: E2 Series controller, PR2 CCT controller (20A), HR2 CCT controller (30A)
- The CCT and single-colour modes of our multi-mode controllers, including PR5 and HR5
- The FUT035SA+ CCT kit controller
- Other Mi-Light / MiBoxer 2.4GHz dual-white products that list CCT remote support
Not compatible with: Colour strip. This is a dual-white remote — it has no RGB controls, so it cannot drive an RGB, RGBW or RGB+CCT controller. For those use the C4 RGB+CCT remote. It is also a 2.4GHz remote, so it will not pair with our 433MHz kits (FUT041, FUT042) or with the SPI addressable controllers, which use their own remote family.
Which CCT Remote Should You Pick?
The C3 trades zones for feel. It has no zone buttons, so it drives everything it is paired with as one — which is exactly right for a single room and wrong for a house. If you need to control areas separately, take the 4-zone C1 or FUT006 instead. The FUT007 adds a night-light mode, and the FUT087 is a plain touch dimmer with no colour temperature at all.
Key Features
Slider control
One slider for brightness, one for colour temperature — no menus to step through.
Magnetic base
Sticks to a wall plate or any steel surface, and lifts off to use in the hand.
2.4GHz RF, not infrared
Works through walls with no line of sight, up to 30m.
Multi-controller pairing
Drives every paired controller together, as one zone.
Black or white
Pick the finish that disappears into the room.
GFSK modulation
Stable transmission with good resistance to interference.
Technical Specifications
| Product Name | CCT Remote with Sliders |
|---|---|
| Model | C3 (White) / C3-B (Black) |
| Zones | None — all paired controllers together |
| Adjusts | Brightness and colour temperature, by slider |
| Working Voltage | 3V (2 × AAA batteries, not included) |
|---|---|
| Transmitting Power | 6dBm |
| RF | 2.4GHz, 2400-2483.5 MHz |
| Modulation | GFSK |
| Control Distance | 30m |
| Working Temperature | -10°C to 60°C |
Setup Notes
- Fit 2 × AAA batteries — not included.
- Pair the remote to each controller separately: power the controller off and on, then press a key on the remote (or the zone key you want it on) within a few seconds.
- One remote can drive several controllers, and a controller can be bound to more than one remote.
- Range is up to 30m and does not need line of sight, but large metal surfaces and other 2.4GHz traffic shorten it.
Not Sure This Is the Right One?
- Pick the C1 4-zone CCT remote if you need four separately controlled zones.
- Pick the FUT006 4-zone CCT remote if you want zones and prefer a rotating wheel.
- Pick the FUT087 touch dimming remote if you only need brightness, with no colour temperature.
- Pick the C4 RGB+CCT remote if your strip is colour rather than tunable white.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.