MiBoxer C1 4-Zone CCT LED Remote, 2.4GHz, Magnetic Base, Black or White
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The C1 is a 4-zone CCT remote for tunable white lighting. It splits the room into four independently controlled zones, each with its own brightness and colour temperature, and the magnetic base means it sticks to a wall plate or any steel surface instead of disappearing into a sofa. Black or white.
Which Controllers Does It Work With?
- Our 2-in-1 CCT controllers: E2 Series controller, PR2 CCT controller (20A), HR2 CCT controller (30A)
- The CCT and single-colour modes of our multi-mode controllers, including PR5 and HR5
- The FUT035SA+ CCT kit controller
- Other Mi-Light / MiBoxer 2.4GHz dual-white products that list CCT remote support
Not compatible with: Colour strip. This is a dual-white remote — it has no RGB controls, so it cannot drive an RGB, RGBW or RGB+CCT controller. For those use the C4 RGB+CCT remote. It is also a 2.4GHz remote, so it will not pair with our 433MHz kits (FUT041, FUT042) or with the SPI addressable controllers, which use their own remote family.
Which CCT Remote Should You Pick?
Four of ours do tunable white, and they differ by how you operate them rather than what they control. The C1 and FUT006 both give four zones — C1 with buttons and a magnetic base, FUT006 with a rotating wheel. The C3 drops zones in favour of sliders, which is the nicest to use if you only have one zone. The FUT007 adds a night-light mode. If you only need brightness and no colour temperature at all, the FUT087 is a plain touch dimmer.
Key Features
4-zone control
Four areas on one remote, each with independent brightness and colour temperature.
Magnetic base
Sticks to a wall plate or any steel surface, and lifts off to use in the hand.
2.4GHz RF, not infrared
Works through walls with no line of sight, up to 30m.
Multi-controller pairing
One remote can drive several paired controllers at once.
Black or white
Pick the finish that disappears into the room.
GFSK modulation
Stable transmission with good resistance to interference.
Technical Specifications
| Product Name | 4-Zone CCT Remote |
|---|---|
| Model | C1 (White) / C1-B (Black) |
| Zones | 4, independently controlled |
| Adjusts | Brightness and colour temperature |
| Working Voltage | 3V (2 × AAA batteries, not included) |
|---|---|
| Transmitting Power | 6dBm |
| RF | 2.4GHz, 2400-2483.5 MHz |
| Modulation | GFSK |
| Control Distance | 30m |
| Working Temperature | -10°C to 60°C |
Setup Notes
- Fit 2 × AAA batteries — not included.
- Pair the remote to each controller separately: power the controller off and on, then press a key on the remote (or the zone key you want it on) within a few seconds.
- One remote can drive several controllers, and a controller can be bound to more than one remote.
- Range is up to 30m and does not need line of sight, but large metal surfaces and other 2.4GHz traffic shorten it.
Not Sure This Is the Right One?
- Pick the FUT006 4-zone CCT remote if you prefer a rotating wheel to buttons.
- Pick the C3 slider CCT remote if you have one zone and want slider control.
- Pick the FUT087 touch dimming remote if you only need brightness, with no colour temperature.
- Pick the C4 RGB+CCT remote if your strip is colour rather than tunable white.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.