C4 RGB+CCT LED Remote Control, 2.4GHz RF, Magnetic Mount, Black or White
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The C4 is an RGB+CCT LED remote control for our 5-in-1 controllers. One handset covers colour, colour temperature from warm to cool, brightness and saturation — and because it runs on 2.4GHz RF rather than infrared, it works through walls at up to 30m with no line of sight, no app and no network. Available in black or white.
Which Controllers Does It Pair With?
- Our 5-in-1 controllers: PW5, PZ5, HR5, HW5, HZ5 and PR5
- Our E3-RF 3-in-1 controller
- Other Mi-Light / MiBoxer 2.4GHz products that list RGB+CCT remote support
- Several controllers at once — one remote can drive a whole room
Not compatible with: The 2-in-1 white-only controllers — PW2, PZ2, HR2, HW2, HZ2 and PR2 — use the single-colour / dual-white remote family (FUT006, FUT007, B1, B2, K1, S1) instead, because they have no colour channels for this remote to drive. It is also not an SPI remote: it will not pair with the addressable SPIR3 or SPIR5.
Why a Remote When There Is an App?
Because other people use the room. A remote needs nothing installed, no account and no WiFi password shared with a guest — it just works, for anyone who picks it up. On the WiFi and Zigbee controllers the remote runs alongside the app rather than instead of it; on the RF-only models it is the control method. The magnetic back means it sticks to a wall or any steel surface instead of disappearing into a sofa.
Key Features
Full RGB+CCT control
Colour, colour temperature, brightness and saturation from one handset.
2.4GHz RF, not infrared
Works through walls with no line of sight, up to 30m.
Multi-controller pairing
One remote can drive several paired controllers at once.
Magnetic mount
Sticks to a wall plate or any steel surface, and lifts off to use in the hand.
15μA standby
A set of AAA batteries lasts a long time.
GFSK modulation
Stable transmission with good resistance to interference.
Black or white
Pick the finish that disappears into the room.
Technical Specifications
| Product Name | RGB+CCT Remote |
|---|---|
| Model | C4 |
| Finish | Black or White |
| Working Voltage | 3V (2 × AAA batteries) |
| Standby Power Consumption | 15μA |
| Transmitting Power | 6dBm |
| RF Frequency | 2.4GHz |
|---|---|
| Modulation Method | GFSK |
| Control Distance | 30m |
| Mounting | Magnetic |
| Working Temperature | -10°C to 40°C |
| Certification | CE / EMC / RED |
Standards Tested To
| Standard | Reference |
|---|---|
| EMC Standard | ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.3.2 (2023-01) |
| Safety Standard (LVD) | EN 61347-2-11:2001+A1:2019 EN 61347-1:2015+A1:2021 EN 62493:2015+A1:2022 |
| Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 (2018-07) |
Button Functions
Installation Notes
Fit two AAA batteries and pair the remote to the controller following the pairing step in the controller manual — usually powering the controller off and on, then pressing a key on the remote within a few seconds. Check that your controller lists RGB+CCT remote support before ordering.
Not Sure This Is the Right One?
- Pick the PW5 WiFi 5-in-1 (20A) if you still need the controller itself.
- Pick the PR2 RF CCT (20A) if your strip is white only — it uses a different remote family.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.