PW2 WiFi CCT LED Controller & Dimmer, 20A, Tuya App & Voice, DC12-48V
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The PW2 is a WiFi CCT LED controller and dimmer for white tape: plain dimming on single-colour strip, or warm-to-cool blending on tunable white. Rated 20A and 960W across DC12-48V, it connects straight to your 2.4GHz network with no hub to buy and runs from the Tuya app, Alexa, Google Home, a 2.4GHz remote or a plain wall switch.
Which Model Do You Need?
Twelve controllers share this platform. They differ on exactly two things, so pick by answering two questions: how do you want to control it, and how big is the run. Everything else — DC12-48V input, PUSH dimming, common-anode output, the wiring — is the same across all of them.
| Control method | 2-in-1 · white only | 5-in-1 · adds colour | Total output |
|---|---|---|---|
|
2.4GHz RF only No app. Remote and wall switch only — nothing on your network. |
PR2 | PR5 | 20A |
| HR2 | HR5 | 30A | |
|
WiFi + Bluetooth Tuya app, Alexa and Google Home. No hub to buy. |
PW2 — this one | PW5 | 20A |
| HW2 | HW5 | 30A | |
|
Zigbee 3.0 Mesh network, 100m range. Needs a Zigbee gateway. |
PZ2 | PZ5 | 20A |
| HZ2 | HZ5 | 30A |
The 2-in-1 models drive single colour and tunable white. The 5-in-1 models add RGB, RGBW and RGB+CCT and cost about $2 more, so unless you are certain the run will never be colour, the 5-in-1 is usually the safer buy. 20A handles up to 960W; 30A handles up to 1440W.
What This Controller Works With
- Single colour LED strip — 2 pads (V+, V-), any colour
- Tunable white / CCT LED strip — 3 pads (V+, WW, CW)
- Common-anode constant-voltage tape at DC 12V, 24V, 36V or 48V
- An ordinary momentary wall switch, through the PUSH input
Not compatible with: RGB, RGBW and RGB+CCT strip — those need a 5-in-1 model such as the PW5 WiFi 5-in-1 (20A). Addressable / pixel tape is not supported. If your strip is marked WS2812B, WS2811, WS2815, SK6812 or WS2805, or has three pads (VCC / DAT / GND) with a chip on every LED, it needs an SPI controller instead — see the SPIR3 or SPIR5.
Count the solder pads on the cut end of your strip. Two pads is single colour, three is tunable white, four is RGB, five is RGBW and six is RGB+CCT. A chip marking such as WS2812B or SK6812 means the strip is addressable and needs an SPI controller rather than a PWM one.
Why 20A and 48V Matter
A typical 6A controller covers a few metres of tape. This one carries 960W at 48V — roughly four times the load — so a long cove or a whole-room perimeter runs through a single controller instead of being split with a repeater. The 48V support matters for the same reason: at 48V a run goes much further before voltage drop becomes visible at the far end.
Key Features
2-in-1 output modes
Single Colour or Dual White (CCT), selected with the SET button.
20A total output
Up to 960W at 48V — enough for a long cove or a full room perimeter on one controller.
DC12-48V input
Covers 12V, 24V, 36V and 48V constant-voltage tape. At 48V a run goes much further before voltage drop shows at the far end.
Tuya Smart app
Groups, scenes, timers and countdowns, music rhythm, biorhythm, sleep and wake plans, automation, Tap-to-Run and device sharing.
Voice control
Amazon Alexa and Google Home through the Tuya integration.
Bluetooth fallback
Close-range control stays available when the router connection drops.
PUSH dimming
Wire an ordinary momentary wall switch: short press for ON/OFF, long press for stepless brightness. Works with no wireless control at all.
Auto-transmitting & sync
Linked controllers relay the RF signal and run dynamic modes in step across a large space.
Do Not Disturb mode
Configurable behaviour after a power failure.
App and Voice Control, No Hub
This is the WiFi version: it joins your 2.4GHz network directly and runs from the Tuya Smart app, Alexa and Google Home with nothing else to buy. Bluetooth is built in as a fallback, so close-range control still works when the router is down. It also still accepts a 2.4GHz RF remote, so anyone in the room can use the lighting without installing an app. The one dependency is your router — if that is a problem, the RF version has no network at all and the Zigbee version uses its own mesh.
Technical Specifications
| Model | PW2 |
|---|---|
| Product Name | 2-in-1 LED Controller |
| Supported Strip Types | Single colour (2-pad) / tunable white CCT (3-pad) |
| Input Voltage | DC12V-48V |
| Output | 10A / Channel |
| Total Output | Max 20A |
| Max Load Power | 960W at 48V / 480W at 24V / 240W at 12V |
| Output Type | Constant Voltage |
| Communication | WiFi 2.4GHz + Bluetooth 4.2 LE + 2.4GHz RF |
|---|---|
| WiFi Standard | IEEE 802.11 b/g/n 2.4GHz |
| App | Tuya Smart (iOS / Android) |
| Voice Control | Amazon Alexa / Google Home |
| Hub Required | No |
| RF Control Distance | 30m |
| Wired Control | PUSH switch input |
| Output Connection | Common Anode |
| Working Temperature | -10°C to 40°C |
| Dimensions | 119 × 47 × 23 mm |
| Warranty | 5 Years |
Output Mode Indicator
| Indicator Colour | Output Mode |
|---|---|
| Red | Single Colour Mode |
| Green | Dual White / CCT Mode |
Wiring Diagrams
Compatible 2.4GHz Remotes
FUT006, FUT007, B1 / B1-B / T1, B2 / T2, K1 / K1-B, FUT087 / FUT087-B and S1-B / S1-W / S1-G — the Mi-Light / MiBoxer 2.4GHz single-colour and dual-white remote family. Sold separately.
Installation Notes
- Turn the power supply off before wiring.
- Match the supply voltage to the strip — a 24V strip on a 12V supply looks dim, and a 12V strip on 24V will be damaged.
- Select the output mode with the SET button before connecting the strip.
- Stay inside the controller's rated output, and add a second supply with a repeater on runs beyond it.
- Keep it away from large metal surfaces and sources of interference, which shorten wireless range.
- The housing is IP20 — mount it somewhere dry and ventilated even when the tape is outdoor rated.
Not Sure This Is the Right One?
- Pick the PW5 WiFi 5-in-1 (20A) if you also run RGB, RGBW or RGB+CCT tape.
- Pick the HW2 WiFi CCT (30A) if your run needs more than 20A.
- Pick the PR2 RF CCT (20A) if you do not want anything on your network — RF remote only.
- Pick the PZ2 Zigbee CCT (20A) if you run a Zigbee smart-home network.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.