FUT043A+ 3-in-1 RGB / RGBW / RGB+CCT Controller Kit with FUT088 Remote, 15A
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The FUT043A+ is a 3-in-1 controller kit supplied with the FUT088 full-touch remote. It is the highest-output kit here at 15A, against 12A for the FUT037SA+ and 10A for the RGB and RGBW kits — so it is the one for a long colour run.
What This Kit Works With
- RGB strip — 4 pads (V+, R, G, B)
- RGBW strip — 5 pads (V+, R, G, B, W)
- RGB+CCT strip — 6 pads (V+, R, G, B, WW, CW)
- Common-anode constant-voltage tape at DC 12V or 24V, 6A per channel and 15A total
Not compatible with: Addressable / pixel tape is not supported. If your strip is marked WS2812B, WS2811, WS2815 or SK6812, or has three pads (VCC / DAT / GND) with a chip on every LED, it needs an SPI controller instead.
Count the solder pads on the cut end of your strip. Two pads is single colour, three is tunable white, four is RGB, five is RGBW and six is RGB+CCT. A chip marking such as WS2812B means the strip is addressable and needs an SPI controller rather than a PWM one.
Kit or Separate Parts?
A kit is the simple route: matched controller and remote, already paired. Buying separately is possible — a bare E3-RF, PR5 or HR5 plus the C4 RGB+CCT remote — and it is worth doing when you want more output than this kit offers: the PR5 carries 20A and the HR5 30A, against 10–15A here.
Key Features
15A total output
The highest of the kits here — up to 360W at 24V.
Supplied with the FUT088 remote
A full-touch 2.4GHz handset rather than a button pad.
3-in-1 output
RGB, RGBW or RGB+CCT, selected on the controller.
16 million colours
Full colour wheel with brightness, saturation and colour-temperature adjustment.
2.4GHz RF, not infrared
Works through walls with no line of sight.
Gateway upgradeable
Add the WL-Box2 later for app and voice control.
Adding App and Voice Control Later
This kit is remote-controlled out of the box, with nothing on your network. If you later want phone and voice control — scenes, schedules, Alexa and Google Home — add the WL-Box2 2.4GHz gateway and the same controller joins the Tuya app without being replaced. One gateway covers every compatible 2.4GHz device in range, so you need one for the house rather than one per controller.
Technical Specifications
Controller
| Model | FUT043A+ |
|---|---|
| Product Name | 3-in-1 LED Strip Controller (2.4GHz) |
| Supported Strip Types | RGB (4-pad) / RGBW (5-pad) / RGB+CCT (6-pad) |
| Input Voltage | DC 12-24V |
| Output | 6A / channel |
| Total Output | Max 15A |
| Max Load Power | 360W at 24V / 180W at 12V |
| Output Connection | Common anode |
| Control Signal | 2.4GHz RF |
| Control Distance | 30m |
Included Remote
| Model | FUT088 |
|---|---|
| Type | 2.4GHz full-touch remote |
| Working Voltage | 3V (2 × AAA, not included) |
| Control Distance | 30m |
Setup Notes
- Power off before wiring.
- Match the supply voltage to the strip — a 24V strip on a 12V supply looks dim, and a 12V strip on 24V will be damaged.
- These are common-anode outputs: the shared positive goes to V+, and each colour channel to its own terminal.
- Stay inside the rated output. Longer runs need a second supply with a repeater rather than a bigger controller.
- The remote needs 2 × AAA batteries, which are not included.
- Pair the remote to the controller on first use, following the pairing step in the manual — usually powering the controller off and on, then pressing a key on the remote within a few seconds.
Not Sure This Is the Right One?
- Pick the FUT037SA+ RGB+CCT kit if 12A is enough and you prefer the S2-W wall-style remote.
- Pick the FUT028 RGBW kit if your strip is RGBW only — that kit is cheaper.
- Pick the PR5 5-in-1 controller (20A) if you want 20A at 12-48V and will choose your own remote.
- Pick the HR5 5-in-1 controller (30A) if you want 30A for a commercial-length run.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.