FUT020 RGB LED Controller Kit with 2.4GHz Remote, 16M Colours, 12-24V
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The FUT020 is an RGB LED controller kit — controller and 2.4GHz remote in one box, already matched. It drives 4-pin RGB tape at 12-24V with a full colour wheel, independent brightness and saturation, and 30m range through walls.
What This Kit Works With
- RGB LED strip — 4 pads (V+, R, G, B)
- Common-anode constant-voltage tape at DC 12V or 24V
- 6A per channel and 10A total — up to 240W at 24V
- Common RGB tape: 5050, 2835 and RGB FCOB / COB strip
Not compatible with: Addressable / pixel tape is not supported. If your strip is marked WS2812B, WS2811, WS2815 or SK6812, or has three pads (VCC / DAT / GND) with a chip on every LED, it needs an SPI controller instead.
Count the solder pads on the cut end of your strip. Two pads is single colour, three is tunable white, four is RGB, five is RGBW and six is RGB+CCT. A chip marking such as WS2812B means the strip is addressable and needs an SPI controller rather than a PWM one.
Kit or Separate Parts?
A kit is the simple route: matched controller and remote, already paired. Buying separately is possible — a bare E3-RF, PR5 or HR5 plus the C4 RGB+CCT remote — and it is worth doing when you want more output than this kit offers: the PR5 carries 20A and the HR5 30A, against 10–15A here.
Key Features
Everything in one box
Controller and remote, already a matched pair.
16 million colours
A full colour wheel rather than a fixed set of presets.
Brightness and saturation
Adjusted independently, so a pastel and a saturated version of the same hue are both available.
2.4GHz RF, not infrared
Works through walls with no line of sight, up to 30m.
Common-anode output
The standard wiring for 12-24V RGB tape.
Gateway upgradeable
Add the WL-Box2 later for app and voice control.
Adding App and Voice Control Later
This kit is remote-controlled out of the box, with nothing on your network. If you later want phone and voice control — scenes, schedules, Alexa and Google Home — add the WL-Box2 2.4GHz gateway and the same controller joins the Tuya app without being replaced. One gateway covers every compatible 2.4GHz device in range, so you need one for the house rather than one per controller.
Technical Specifications
Controller
| Model | FUT020 |
|---|---|
| Product Name | RGB LED Strip Controller (2.4GHz) |
| Input Voltage | DC 12-24V |
| Output | 6A / channel |
| Total Output | Max 10A |
| Max Load Power | 240W at 24V / 120W at 12V |
| Output Connection | Common anode |
| Control Signal | 2.4GHz RF |
| Control Distance | 30m |
| Working Temperature | -10°C to 40°C |
Included Remote
| Working Voltage | 3V (2 × AAA, not included) |
|---|---|
| RF | 2.4GHz |
| Control Distance | 30m |
Setup Notes
- Power off before wiring.
- Match the supply voltage to the strip — a 24V strip on a 12V supply looks dim, and a 12V strip on 24V will be damaged.
- These are common-anode outputs: the shared positive goes to V+, and each colour channel to its own terminal.
- Stay inside the rated output. Longer runs need a second supply with a repeater rather than a bigger controller.
- The remote needs 2 × AAA batteries, which are not included.
- Pair the remote to the controller on first use, following the pairing step in the manual — usually powering the controller off and on, then pressing a key on the remote within a few seconds.
Not Sure This Is the Right One?
- Pick the FUT025 RGB kit if you want the same controller with the FUT098 remote instead — it is cheaper.
- Pick the FUT027 RGBW kit if your strip is RGBW, with a separate white channel.
- Pick the FUT037SA+ RGB+CCT kit if your strip is RGB+CCT (6 pads).
- Pick the PR5 5-in-1 controller (20A) if you want 20A and will choose your own remote.
Related
Pair a controller with the matching tape: single colour, tunable white, RGB & RGBW, COB and addressable strip. Everything else is in LED controllers.