{"product_id":"sp636e-addressable-single-color-led-controller","title":"Addressable Single Color LED Strip Controller, SPI 5-24V, Bluetooth App – SP636E","description":"\u003cp\u003eThe \u003cstrong\u003eSP636E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eSPI controller for addressable single color LED strip\u003c\/strong\u003e on DC 5-24V. Unlike a plain dimmer, it addresses each segment individually — so a white or warm-white pixel run can chase, ripple and react to music instead of only fading up and down together.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable single color strip using \u003cstrong\u003esingle-wire (RZ-coded) driver ICs\u003c\/strong\u003e, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n  \u003cli\u003eWhite and warm-white pixel tape, including SPI FCOB dim strip, at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e1800 channels\u003c\/strong\u003e of single-wire driver ICs on one controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Plain 2-pin single color tape with no IC (use the SP631E instead) and clock-based two-wire ICs such as WS2801, APA102 and SK9822, which this controller does not drive.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI addressable single color control\u003c\/strong\u003e — segment-by-segment, not whole-strip\u003c\/li\u003e\n  \u003cli\u003eBuilt-in pure-white dynamic and music-reactive effects with adjustable parameters\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eMultiple ON\/OFF animations plus ON\/OFF timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX connects over Bluetooth with no WiFi or hub. Set the pixel count to match your run, then tune effect speed, direction and brightness from the app.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP636E also pairs with the optional \u003cstrong\u003eRB1 \/ RC1\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Data is directional — wire DAT to the arrow-in end of the strip, or nothing downstream will light.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP636E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI Single Color LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable single color SPI strip (single-wire RZ driver ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 1800 channels of single-wire driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB1 \/ RC1 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp631e-single-color-led-controller\"\u003eSP631E Single Color Dimmer Controller\u003c\/a\u003e if your white strip has no IC and only 2 pins.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if your addressable strip is RGB.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp637e-addressable-cct-led-controller\"\u003eSP637E Addressable CCT Controller\u003c\/a\u003e if your addressable strip is tunable white.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390330039,"sku":"SP636E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp636e-addressable-single-color-led-controller-wiring.webp?v=1789456614","url":"https:\/\/brighttapeled.com\/products\/sp636e-addressable-single-color-led-controller","provider":"BrightTapeLED","version":"1.0","type":"link"}