{"title":"LED Controllers for Strip Lights","description":"\u003cp\u003e\u003cspan\u003eAn LED strip controller sits between your power supply and your tape and decides what the strip can actually do — dim, shift color temperature, change color, or run effects one pixel at a time. This collection carries 13 Bluetooth controllers for DC 5V, 12V and 24V strip: five PWM models for 2-pin to 6-pin tape, five SPI models for addressable pixel strip, two hybrids and one all-in-one, all rated 6A per channel and 12A total.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"sp631e-single-color-led-controller","title":"Single Color LED Strip Dimmer Controller, 5-24V PWM, Bluetooth App \u0026 2.4G Remote – SP631E","description":"\u003cp\u003eThe \u003cstrong\u003eSP631E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003esingle color LED strip dimmer controller\u003c\/strong\u003e for 2-pin tape running on DC 5-24V. It replaces a basic inline dimmer with high-frequency PWM brightness control from the free BanlanX app, plus music-reactive effects and on\/off timers — and it still works from a wall panel or remote if you would rather not reach for a phone.\u003c\/p\u003e\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle color LED strips with \u003cstrong\u003e2 pins\u003c\/strong\u003e (V+ and V-) at 5V, 12V or 24V\u003c\/li\u003e\n\u003cli\u003eSMD tape such as 2835, 3528, 5050 and 5630, plus single color FCOB \/ COB strip\u003c\/li\u003e\n\u003cli\u003eAny single-channel low-voltage LED load inside 6A per channel and 12A total (up to 288W at 24V, 144W at 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e RGB, CCT\/tunable white, RGBW or RGBCCT strips — count the pins on your tape and pick the matching model below. Addressable (IC) strips need an SPI controller, not this PWM model.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1CH high-frequency PWM dimming\u003c\/strong\u003e for smooth, flicker-free brightness across the full range\u003c\/li\u003e\n\u003cli\u003eBuilt-in dynamic and music-reactive effects\u003c\/li\u003e\n\u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n\u003cli\u003eON\/OFF timers set in the app\u003c\/li\u003e\n\u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003cli\u003eBinds up to 5 remotes; unified or 4-zone control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\u003cp\u003eTurn on Bluetooth, open BanlanX and the SP631E appears in the device list — no WiFi, no account and no hub required. From there you can rename the device, set brightness, pick effects, schedule timers and run firmware updates.\u003c\/p\u003e\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\u003cp\u003eSP631E also pairs with the optional \u003cstrong\u003eRB1 \/ RC1\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eV+ \/ V-\u003c\/strong\u003e output terminals as shown on the wiring diagram. Match the strip polarity to the V+ and V- terminals — a reversed single color strip simply will not light.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n\u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n\u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSP631E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1CH PWM Single Color LED Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-pin single color PWM LED strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 5-24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1mA-10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV+ \/ V-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRB1 \/ RC1 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePick the \u003ca href=\"\/products\/sp632e-cct-led-controller\"\u003eSP632E CCT \/ Tunable White Controller\u003c\/a\u003e if your strip has 3 pins (warm + cool white).\u003c\/li\u003e\n\u003cli\u003ePick the \u003ca href=\"\/products\/sp633e-rgb-led-controller\"\u003eSP633E RGB LED Strip Controller\u003c\/a\u003e if your strip has 4 pins (RGB).\u003c\/li\u003e\n\u003cli\u003ePick the \u003ca href=\"\/products\/sp636e-addressable-single-color-led-controller\"\u003eSP636E Addressable Single Color Controller\u003c\/a\u003e if your strip is addressable single color with an IC.\u003c\/li\u003e\n\u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389019319,"sku":"SP631E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp631e-single-color-led-controller-wiring.webp?v=1789456908"},{"product_id":"sp63ae-addressable-rgbcct-led-controller","title":"Addressable RGBCCT LED Strip Controller for WS2805, 5-24V SPI – SP63AE","description":"\u003cp\u003eThe \u003cstrong\u003eSP63AE\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eaddressable RGBCCT LED controller\u003c\/strong\u003e for five-channel pixel strip on DC 5-24V. It is the most capable single-strip format there is: every pixel carries red, green, blue, warm white and cool white, so one run covers moving color effects and a proper tunable-white room light.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable RGBCCT strip on \u003cstrong\u003esingle-wire (RZ-coded) ICs\u003c\/strong\u003e such as WS2805\u003c\/li\u003e\n  \u003cli\u003eFive-channel RGB + CCT pixel tape at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e300 driver ICs\u003c\/strong\u003e on one controller, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e 6-pin RGBCCT tape with no IC (use the SP635E), RGB or RGBW pixel strip (use the SP638E or SP639E) and clock-based two-wire ICs such as WS2801, APA102 and SK9822.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eSPI five-channel addressable RGBCCT control\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects with adjustable parameters\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration plus ON\/OFF animations and timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth with no WiFi or hub. Set the IC count and channel order once, then switch between a plain white scene and a full color effect on the same strip.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP63AE also pairs with the optional \u003cstrong\u003eRB4 \/ RC4\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Capacity is 300 ICs here rather than 600 — five channels per pixel is twice the data of a plain RGB run.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP63AE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI RGBCCT LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable RGBCCT strip (WS2805 and similar single-wire ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 300 single-wire RGBCCT driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB4 \/ RC4 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp639e-addressable-rgbw-led-controller\"\u003eSP639E Addressable RGBW Controller\u003c\/a\u003e if your pixel strip is RGBW with one white.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp635e-rgbcct-led-controller\"\u003eSP635E RGBCCT 5-in-1 Controller\u003c\/a\u003e if your RGBCCT strip has no IC and 6 pins.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if your pixel strip is RGB only.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389117623,"sku":"SP63AE","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp63ae-addressable-rgbcct-led-controller-dimensions.webp?v=1789456880"},{"product_id":"sp63be-addressable-rgb-single-color-led-controller","title":"Addressable RGB + Single Color LED Controller, SPI + PWM 5-24V – SP63BE","description":"\u003cp\u003eThe \u003cstrong\u003eSP63BE\u003c\/strong\u003e is a Bluetooth hybrid controller that runs \u003cstrong\u003eaddressable RGB pixel strip and a plain single color strip at the same time\u003c\/strong\u003e on DC 5-24V. It is built for the common cove setup: pixel tape for effects, an ordinary white run for actual light, both on one controller and one app.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI output:\u003c\/strong\u003e addressable RGB strip on single-wire ICs (WS2812B, WS2811, WS2815 and similar), up to 600 ICs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePWM output:\u003c\/strong\u003e one channel of plain single color tape at 6A\u003c\/li\u003e\n  \u003cli\u003eBoth outputs at 5V, 12V or 24V, wired VCC \/ DAT \/ W \/ GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Clock-based two-wire ICs such as WS2801, APA102 and SK9822. If you only need one of the two output types, the single-purpose models below cost the same and are simpler to wire.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAddressable RGB plus 1CH PWM white\u003c\/strong\u003e from a single controller\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects across both outputs\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration plus ON\/OFF animations and timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth with no WiFi or hub, and treats the pixel run and the white run as separate controls — so the white can stay on while an effect plays.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP63BE also pairs with the optional \u003cstrong\u003eRB3 \/ RC3\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ W \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Both strips share one DC supply, so size the power supply for the two runs together, not just the pixel tape.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP63BE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI RGB + 1CH PWM Single Color LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable RGB strip plus one channel of PWM single color tape\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 600 single-wire RGB driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A (PWM white)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ W \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB3 \/ RC3 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if you only need the addressable RGB side.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp631e-single-color-led-controller\"\u003eSP631E Single Color Dimmer Controller\u003c\/a\u003e if you only need the plain white side.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63ce-addressable-rgb-cct-led-controller\"\u003eSP63CE Addressable RGB + CCT Controller\u003c\/a\u003e if your white run is tunable white rather than one white.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389248695,"sku":"SP63BE","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp63be-addressable-rgb-single-color-led-controller-dimensions.webp?v=1789456855"},{"product_id":"sp63ce-addressable-rgb-cct-led-controller","title":"Addressable RGB + CCT LED Controller, SPI + 2CH PWM 5-24V – SP63CE","description":"\u003cp\u003eThe \u003cstrong\u003eSP63CE\u003c\/strong\u003e is a Bluetooth hybrid controller pairing \u003cstrong\u003eaddressable RGB pixel strip with a 2-channel PWM tunable white run\u003c\/strong\u003e on DC 5-24V. It is the upgrade over a plain white second channel: the functional light can shift from 2700K to 6500K while the pixel tape handles the effects.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI output:\u003c\/strong\u003e addressable RGB strip on single-wire ICs (WS2812B, WS2811, WS2815 and similar), up to 600 ICs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePWM output:\u003c\/strong\u003e two channels of CCT \/ tunable white tape at 6A each\u003c\/li\u003e\n  \u003cli\u003eBoth outputs at 5V, 12V or 24V, wired VCC \/ DAT \/ CW \/ WW \/ GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Clock-based two-wire ICs such as WS2801, APA102 and SK9822. If your second run is a single white rather than tunable white, the SP63BE is the matching model.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAddressable RGB plus 2CH PWM CCT\u003c\/strong\u003e from a single controller\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects across both outputs\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration plus ON\/OFF animations and timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth with no WiFi or hub. The white run gets its own brightness and color-temperature control, independent of whatever the pixel strip is doing.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP63CE also pairs with the optional \u003cstrong\u003eRB4 \/ RC4\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ CW \/ WW \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Size the DC supply for the pixel run and the tunable white run combined — CCT tape at full output is the heavier load.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP63CE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI RGB + 2CH PWM CCT LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable RGB strip plus two channels of PWM CCT tape\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 600 single-wire RGB driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A (PWM CCT)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ CW \/ WW \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB4 \/ RC4 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63be-addressable-rgb-single-color-led-controller\"\u003eSP63BE Addressable RGB + Single Color Controller\u003c\/a\u003e if your second run is a single white, not tunable.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if you only need the addressable RGB side.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp632e-cct-led-controller\"\u003eSP632E CCT \/ Tunable White Controller\u003c\/a\u003e if you only need the tunable white side.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389412535,"sku":"SP63CE","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp63ce-addressable-rgb-cct-led-controller-dimensions.webp?v=1789456829"},{"product_id":"sp630e-all-in-one-led-controller","title":"All-in-One LED Strip Controller, 12 LED Types PWM + SPI, 5-24V Bluetooth – SP630E","description":"\u003cp\u003eThe \u003cstrong\u003eSP630E\u003c\/strong\u003e is the \u003cstrong\u003eall-in-one LED strip controller\u003c\/strong\u003e of the range: one box that covers 12 different strip types on DC 5-24V, PWM and addressable alike. You pick the LED type in the BanlanX app rather than buying a different controller — which makes it the safe choice when you are not sure what your strip is, or when you keep spares on a shelf.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePWM (no IC):\u003c\/strong\u003e 1CH single color, 2CH CCT, 3CH RGB, 4CH RGBW, 5CH RGBCCT — 2-pin through 6-pin tape\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI (addressable):\u003c\/strong\u003e single color, CCT, RGB, RGBW and RGBCCT pixel strip on single-wire ICs such as WS2812B, WS2811, WS2815, SK6812 and WS2805\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCombined:\u003c\/strong\u003e SPI RGB + 1CH PWM single color, and SPI RGB + 2CH PWM CCT, running together\u003c\/li\u003e\n  \u003cli\u003e5V, 12V or 24V, with 6A per channel and 12A total on the PWM side (up to 288W at 24V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Clock-based two-wire ICs such as WS2801, APA102 and SK9822, and mains-voltage 110V\/220V strip. This model is Bluetooth only — there is no WiFi, Alexa or Google Home support.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12 selectable LED types\u003c\/strong\u003e switched in the app, no rewiring of the controller\u003c\/li\u003e\n  \u003cli\u003eDynamic, static, music-reactive and custom pages in BanlanX\u003c\/li\u003e\n  \u003cli\u003eMultiple ON\/OFF animations and a selectable default power-on state\u003c\/li\u003e\n  \u003cli\u003eDevice renaming, LED type selection, color-order calibration and timers\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSupports RB1-RB4 touch remotes and RC1-RC4 86-type wall panels, unified or 4-zone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003ePair over Bluetooth in BanlanX — no WiFi, account or hub — then set the LED type to match your strip. Change strips later and you change a setting, not the hardware.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP630E also pairs with the optional \u003cstrong\u003eRB1-RB4 \/ RC1-RC4 (matched to the LED type you select)\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003edepends on the selected LED type — up to V+ \/ R \/ G \/ B \/ WW \/ CW on PWM, or VCC \/ DAT \/ GND on SPI\u003c\/strong\u003e output terminals as shown on the wiring diagram. Set the LED type in the app \u003cem\u003ebefore\u003c\/em\u003e powering a strip for the first time, so the outputs match your tape.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP630E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI + 5CH PWM All-in-One LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12 LED types: PWM 1-5CH, SPI addressable, and combined SPI + PWM\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3mA-13mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003edepends on the selected LED type — up to V+ \/ R \/ G \/ B \/ WW \/ CW on PWM, or VCC \/ DAT \/ GND on SPI\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB1-RB4 \/ RC1-RC4 (matched to the LED type you select) (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp631e-single-color-led-controller\"\u003eSP631E Single Color Dimmer Controller\u003c\/a\u003e if you only ever run plain single color tape.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp633e-rgb-led-controller\"\u003eSP633E RGB LED Strip Controller\u003c\/a\u003e if you only ever run 4-pin RGB tape.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if you only ever run WS2812B pixel tape.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63ce-addressable-rgb-cct-led-controller\"\u003eSP63CE Addressable RGB + CCT Controller\u003c\/a\u003e if you run pixel RGB and tunable white together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389543607,"sku":"SP630E","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp630e-all-in-one-led-controller-dimensions.webp?v=1789456789"},{"product_id":"sp632e-cct-led-controller","title":"CCT LED Strip Controller for Tunable White, 5-24V 2CH PWM, Bluetooth App – SP632E","description":"\u003cp\u003eThe \u003cstrong\u003eSP632E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eCCT LED strip controller\u003c\/strong\u003e for 3-pin tunable white tape on DC 5-24V. Two PWM channels drive the warm and cool white rows separately, so you can slide from a 2700K evening warm to a 6500K task white and set brightness independently — from the BanlanX app or an optional wall panel.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTunable white \/ dual-white LED strips with \u003cstrong\u003e3 pins\u003c\/strong\u003e (V+, WW, CW) at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eCCT SMD tape (2835, 5050 dual-row) and CCT FCOB \/ COB strip\u003c\/li\u003e\n  \u003cli\u003eTwo PWM channels at 6A each, 12A total (up to 288W at 24V, 144W at 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Single color, RGB, RGBW or RGBCCT tape, and any addressable CCT strip that carries a driver IC — that one needs the SPI model SP637E.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2CH PWM CCT control\u003c\/strong\u003e: color temperature and brightness adjusted independently\u003c\/li\u003e\n  \u003cli\u003eSmooth warm-to-cool blending rather than stepped presets\u003c\/li\u003e\n  \u003cli\u003eBuilt-in dynamic and music-reactive white effects\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration if WW and CW land the wrong way round\u003c\/li\u003e\n  \u003cli\u003eON\/OFF timers and OTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003ePair over Bluetooth in BanlanX — no WiFi or hub — then set the white point, save scenes for morning and evening, schedule timers and calibrate the channel order if the warm and cool wires are swapped.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP632E also pairs with the optional \u003cstrong\u003eRB2 \/ RC2\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eV+ \/ CW \/ WW\u003c\/strong\u003e output terminals as shown on the wiring diagram. If warm and cool respond backwards, swap the CW and WW leads or use the channel calibration in the app.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP632E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e2CH PWM CCT LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3-pin CCT \/ tunable white PWM LED strips\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eV+ \/ CW \/ WW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB2 \/ RC2 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp631e-single-color-led-controller\"\u003eSP631E Single Color Dimmer Controller\u003c\/a\u003e if your strip has 2 pins (one white only).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp635e-rgbcct-led-controller\"\u003eSP635E RGBCCT 5-in-1 Controller\u003c\/a\u003e if you want RGB and tunable white on one run.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp637e-addressable-cct-led-controller\"\u003eSP637E Addressable CCT Controller\u003c\/a\u003e if your CCT strip is addressable.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389674679,"sku":"SP632E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp632e-cct-led-controller-dimensions.webp?v=1789456761"},{"product_id":"sp633e-rgb-led-controller","title":"RGB LED Strip Controller, 5-24V 3CH PWM, Bluetooth App \u0026 2.4G Remote – SP633E","description":"\u003cp\u003eThe \u003cstrong\u003eSP633E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eRGB LED strip controller\u003c\/strong\u003e for standard 4-pin tape on DC 5-24V. Three PWM channels mix red, green and blue across the whole strip at once, with a full color wheel, dynamic and music-reactive effects, and your own DIY scenes saved in the BanlanX app.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRGB LED strips with \u003cstrong\u003e4 pins\u003c\/strong\u003e (V+, R, G, B) at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eCommon RGB tape such as 5050, 2835 and RGB FCOB \/ COB strip\u003c\/li\u003e\n  \u003cli\u003eThree PWM channels at 6A each, 12A total (up to 288W at 24V, 144W at 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Addressable RGB tape with a built-in IC (WS2812B, WS2811 and similar) — that is pixel strip and needs the SPI model SP638E. Also not for RGBW or RGBCCT strips, which carry extra white pins.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3CH PWM RGB control\u003c\/strong\u003e with a full color wheel and brightness slider\u003c\/li\u003e\n  \u003cli\u003eBuilt-in dynamic, music-reactive and DIY effects, saved to an effect collection\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration when the R\/G\/B order does not match your strip\u003c\/li\u003e\n  \u003cli\u003eON\/OFF timers and OTA firmware updates\u003c\/li\u003e\n  \u003cli\u003eBinds up to 5 remotes; unified or 4-zone control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBluetooth pairing in BanlanX takes a few seconds and needs no WiFi, account or hub. Pick a static color, run an effect, build your own scene, or let the onboard microphone drive the strip from whatever is playing.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP633E also pairs with the optional \u003cstrong\u003eRB3 \/ RC3\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eV+ \/ R \/ G \/ B\u003c\/strong\u003e output terminals as shown on the wiring diagram. If red shows as green, run the color-order calibration in the app rather than rewiring the strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP633E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e3CH PWM RGB LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e4-pin RGB PWM LED strips\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eV+ \/ R \/ G \/ B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB3 \/ RC3 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp634e-rgbw-led-controller\"\u003eSP634E RGBW LED Strip Controller\u003c\/a\u003e if your strip has 5 pins (RGB plus a white row).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if your RGB strip is addressable \/ pixel type.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp635e-rgbcct-led-controller\"\u003eSP635E RGBCCT 5-in-1 Controller\u003c\/a\u003e if your strip has 6 pins (RGB plus warm and cool white).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389805751,"sku":"SP633E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp633e-rgb-led-controller-dimensions.webp?v=1789456700"},{"product_id":"sp634e-rgbw-led-controller","title":"RGBW LED Strip Controller, 5-24V 4CH PWM, Bluetooth App \u0026 2.4G Remote – SP634E","description":"\u003cp\u003eThe \u003cstrong\u003eSP634E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eRGBW LED strip controller\u003c\/strong\u003e for 5-pin tape on DC 5-24V. The dedicated fourth channel drives the white row on its own, so you get a clean, usable white for everyday light instead of the muddy R+G+B mix — and color on top of it when you want it.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRGBW LED strips with \u003cstrong\u003e5 pins\u003c\/strong\u003e (V+, R, G, B, W) at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eRGBW and RGBWW tape in 5050 four-in-one or RGB + separate white row layouts\u003c\/li\u003e\n  \u003cli\u003eFour PWM channels at 6A each, 12A total (up to 288W at 24V, 144W at 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e 4-pin RGB tape (use the SP633E), 6-pin RGBCCT tape (use the SP635E), and addressable RGBW strip with an SK6812 or WS2814 style IC (use the SP639E).\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4CH PWM RGBW control\u003c\/strong\u003e with the white channel dimmed separately from the color channels\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects across both the RGB and W channels\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saving the scenes you actually use\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration and ON\/OFF timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX connects straight over Bluetooth — no WiFi, hub or account. Set a white level for daily use, layer color for evenings, and store both as scenes you can recall in a tap.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP634E also pairs with the optional \u003cstrong\u003eRB3 \/ RC3\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eV+ \/ R \/ G \/ B \/ W\u003c\/strong\u003e output terminals as shown on the wiring diagram. Leave the W lead unconnected and the controller still runs plain RGB, so a mis-ordered strip is not a dead end.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP634E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e4CH PWM RGBW LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e5-pin RGBW PWM LED strips\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eV+ \/ R \/ G \/ B \/ W\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB3 \/ RC3 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp633e-rgb-led-controller\"\u003eSP633E RGB LED Strip Controller\u003c\/a\u003e if your strip has 4 pins (RGB only).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp635e-rgbcct-led-controller\"\u003eSP635E RGBCCT 5-in-1 Controller\u003c\/a\u003e if your strip has 6 pins (RGB plus warm and cool white).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp639e-addressable-rgbw-led-controller\"\u003eSP639E Addressable RGBW Controller\u003c\/a\u003e if your RGBW strip is addressable.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185389904055,"sku":"SP634E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp634e-rgbw-led-controller-wiring.webp?v=1789456668"},{"product_id":"sp635e-rgbcct-led-controller","title":"RGBCCT LED Strip Controller 5-in-1, 5-24V 5CH PWM, Bluetooth App – SP635E","description":"\u003cp\u003eThe \u003cstrong\u003eSP635E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eRGBCCT LED strip controller\u003c\/strong\u003e for 6-pin 5-in-1 tape on DC 5-24V. Five PWM channels give you full RGB color \u003cem\u003eand\u003c\/em\u003e a separate warm-to-cool white mix on a single run — the usual pick for a cove or ceiling that has to work as both accent lighting and real room light.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRGBCCT \/ RGB+CCT LED strips with \u003cstrong\u003e6 pins\u003c\/strong\u003e (V+, R, G, B, WW, CW) at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003e5-in-1 5050 tape and RGBCCT FCOB \/ COB strip\u003c\/li\u003e\n  \u003cli\u003eFive PWM channels at 6A each, 12A total (up to 288W at 24V, 144W at 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e 4-pin RGB and 5-pin RGBW tape (use the SP633E or SP634E) and addressable RGBCCT strip carrying a WS2805 style IC (use the SP63AE).\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5CH PWM RGBCCT control\u003c\/strong\u003e: RGB color and CCT white adjusted independently\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects across the RGB and CCT channels\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eSequential channel calibration and ON\/OFF timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth with no WiFi or hub. Because color and white are separate channels, you can keep a 3000K white scene for daily use and a color scene for evenings without rewiring anything.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP635E also pairs with the optional \u003cstrong\u003eRB4 \/ RC4\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eV+ \/ R \/ G \/ B \/ WW \/ CW\u003c\/strong\u003e output terminals as shown on the wiring diagram. Six-pin tape is easy to misread — check the printed pad labels on the strip before you tighten the terminals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP635E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e5CH PWM RGBCCT LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6-pin RGBCCT (5-in-1) PWM LED strips\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eSingle-Channel Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e6A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eTotal Max Output Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e12A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e288W at 24V \/ 144W at 12V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eV+ \/ R \/ G \/ B \/ WW \/ CW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB4 \/ RC4 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp634e-rgbw-led-controller\"\u003eSP634E RGBW LED Strip Controller\u003c\/a\u003e if your strip has 5 pins (RGB plus one white).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp632e-cct-led-controller\"\u003eSP632E CCT \/ Tunable White Controller\u003c\/a\u003e if your strip is tunable white only.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63ae-addressable-rgbcct-led-controller\"\u003eSP63AE Addressable RGBCCT Controller\u003c\/a\u003e if your RGBCCT strip is addressable.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390133431,"sku":"SP635E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp635e-rgbcct-led-controller-wiring.webp?v=1789456640"},{"product_id":"sp636e-addressable-single-color-led-controller","title":"Addressable Single Color LED Strip Controller, SPI 5-24V, Bluetooth App – SP636E","description":"\u003cp\u003eThe \u003cstrong\u003eSP636E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eSPI controller for addressable single color LED strip\u003c\/strong\u003e on DC 5-24V. Unlike a plain dimmer, it addresses each segment individually — so a white or warm-white pixel run can chase, ripple and react to music instead of only fading up and down together.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable single color strip using \u003cstrong\u003esingle-wire (RZ-coded) driver ICs\u003c\/strong\u003e, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n  \u003cli\u003eWhite and warm-white pixel tape, including SPI FCOB dim strip, at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e1800 channels\u003c\/strong\u003e of single-wire driver ICs on one controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Plain 2-pin single color tape with no IC (use the SP631E instead) and clock-based two-wire ICs such as WS2801, APA102 and SK9822, which this controller does not drive.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI addressable single color control\u003c\/strong\u003e — segment-by-segment, not whole-strip\u003c\/li\u003e\n  \u003cli\u003eBuilt-in pure-white dynamic and music-reactive effects with adjustable parameters\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eMultiple ON\/OFF animations plus ON\/OFF timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX connects over Bluetooth with no WiFi or hub. Set the pixel count to match your run, then tune effect speed, direction and brightness from the app.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP636E also pairs with the optional \u003cstrong\u003eRB1 \/ RC1\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Data is directional — wire DAT to the arrow-in end of the strip, or nothing downstream will light.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP636E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI Single Color LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable single color SPI strip (single-wire RZ driver ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 1800 channels of single-wire driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB1 \/ RC1 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp631e-single-color-led-controller\"\u003eSP631E Single Color Dimmer Controller\u003c\/a\u003e if your white strip has no IC and only 2 pins.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if your addressable strip is RGB.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp637e-addressable-cct-led-controller\"\u003eSP637E Addressable CCT Controller\u003c\/a\u003e if your addressable strip is tunable white.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390330039,"sku":"SP636E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp636e-addressable-single-color-led-controller-wiring.webp?v=1789456614"},{"product_id":"sp637e-addressable-cct-led-controller","title":"Addressable CCT LED Strip Controller, SPI 5-24V, Bluetooth App \u0026 Remote – SP637E","description":"\u003cp\u003eThe \u003cstrong\u003eSP637E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eSPI controller for addressable CCT LED strip\u003c\/strong\u003e on DC 5-24V. It drives dual-channel pixel white tape, so color temperature can shift along the run — a warm gradient sweeping to cool, or a moving white chase — rather than the whole strip sitting at one white point.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable CCT strip using \u003cstrong\u003esingle-wire (RZ-coded) driver ICs\u003c\/strong\u003e, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n  \u003cli\u003eDual-channel warm\/cool pixel tape, including SPI CCT FCOB strip, at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e600 single-wire driver ICs\u003c\/strong\u003e on one controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e 3-pin tunable white tape with no IC (use the SP632E) and clock-based two-wire ICs such as WS2801, APA102 and SK9822.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI dual-channel addressable CCT control\u003c\/strong\u003e with per-segment white point\u003c\/li\u003e\n  \u003cli\u003eStatic dimming plus built-in CCT dynamic and music-reactive effects\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eMultiple ON\/OFF animations plus ON\/OFF timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003ePair over Bluetooth in BanlanX — no WiFi or hub. Set the IC count for your run, then work the white gradient, effect speed and brightness from the app.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP637E also pairs with the optional \u003cstrong\u003eRB2 \/ RC2\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Confirm the IC type with your strip supplier first — addressable CCT tape uses several different chips.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP637E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI CCT LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable dual-channel CCT strip (single-wire RZ driver ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 600 single-wire driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB2 \/ RC2 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp632e-cct-led-controller\"\u003eSP632E CCT \/ Tunable White Controller\u003c\/a\u003e if your tunable white strip has no IC.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp636e-addressable-single-color-led-controller\"\u003eSP636E Addressable Single Color Controller\u003c\/a\u003e if your addressable strip is one white only.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63ae-addressable-rgbcct-led-controller\"\u003eSP63AE Addressable RGBCCT Controller\u003c\/a\u003e if your addressable strip is RGB plus CCT.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390428343,"sku":"SP637E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp637e-addressable-cct-led-controller-wiring.webp?v=1789456585"},{"product_id":"sp638e-addressable-rgb-led-controller","title":"Addressable RGB LED Strip Controller for WS2812B \/ WS2811, 5-24V SPI – SP638E","description":"\u003cp\u003eThe \u003cstrong\u003eSP638E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eaddressable RGB LED controller\u003c\/strong\u003e for pixel strip on DC 5-24V. It speaks the single-wire SPI protocol used by \u003cstrong\u003eWS2812B, WS2811, WS2813, WS2815, UCS1903, GS8208 and TM1804\/1812\u003c\/strong\u003e tape, so each LED can run its own color — chases, rainbows, meteors and music spectrums rather than one flat color.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable RGB strip on \u003cstrong\u003esingle-wire (RZ-coded) ICs\u003c\/strong\u003e: WS2812B, WS2811, WS2813, WS2815, UCS1903\/1909, GS8206\/GS8208, TM1804\/1812\u003c\/li\u003e\n  \u003cli\u003eRGB pixel FCOB \/ COB strip and pixel modules, at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e600 driver ICs\u003c\/strong\u003e on one controller, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Plain 4-pin RGB tape with no IC (use the SP633E) and clock-based two-wire ICs such as WS2801, APA102 and SK9822, which need a separate data and clock line.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI addressable RGB control\u003c\/strong\u003e with per-pixel color\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects with adjustable speed, direction and segment length\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eColor-order calibration (RGB \/ GRB and so on) plus ON\/OFF animations and timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth with no WiFi, hub or account. Set your IC type, pixel count and color order once, and the effect library is ready to run.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP638E also pairs with the optional \u003cstrong\u003eRB3 \/ RC3\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. Data is directional: wire DAT to the arrow-in end. If colors come out swapped, fix the color order in the app rather than rewiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP638E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI RGB LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable RGB strip (WS2812B, WS2811, WS2815 and similar single-wire ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 600 single-wire RGB driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB3 \/ RC3 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp633e-rgb-led-controller\"\u003eSP633E RGB LED Strip Controller\u003c\/a\u003e if your RGB strip has no IC and 4 pins.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp639e-addressable-rgbw-led-controller\"\u003eSP639E Addressable RGBW Controller\u003c\/a\u003e if your pixel strip is RGBW (SK6812 and similar).\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63be-addressable-rgb-single-color-led-controller\"\u003eSP63BE Addressable RGB + Single Color Controller\u003c\/a\u003e if you also have a separate white strip to run.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390559415,"sku":"SP638E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp638e-addressable-rgb-led-controller-dimensions.webp?v=1789456559"},{"product_id":"sp639e-addressable-rgbw-led-controller","title":"Addressable RGBW LED Strip Controller for SK6812 \/ WS2814, 5-24V SPI – SP639E","description":"\u003cp\u003eThe \u003cstrong\u003eSP639E\u003c\/strong\u003e is a Bluetooth \u003cstrong\u003eaddressable RGBW LED controller\u003c\/strong\u003e for pixel strip with a dedicated white die on DC 5-24V. It drives \u003cstrong\u003eSK6812 RGBW, WS2814, TM1814, SM16704 and UCS2904\u003c\/strong\u003e tape, so you keep per-pixel effects and still get a clean white for everyday light.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Controller Works With\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAddressable RGBW strip on \u003cstrong\u003esingle-wire ICs\u003c\/strong\u003e: SK6812 RGBW, WS2814, TM1814, SM16704, UCS2904\u003c\/li\u003e\n  \u003cli\u003eRGBW pixel tape and modules at 5V, 12V or 24V\u003c\/li\u003e\n  \u003cli\u003eUp to \u003cstrong\u003e450 driver ICs\u003c\/strong\u003e on one controller, wired VCC \/ DAT \/ GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Plain 5-pin RGBW tape with no IC (use the SP634E), RGB-only pixel strip (use the SP638E) and clock-based two-wire ICs such as WS2801, APA102 and SK9822.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPI addressable RGBW control\u003c\/strong\u003e with the white die driven per pixel\u003c\/li\u003e\n  \u003cli\u003eDynamic, music-reactive and DIY effects with adjustable parameters\u003c\/li\u003e\n  \u003cli\u003eEffect collection for saved scenes\u003c\/li\u003e\n  \u003cli\u003eThree music capture modes: phone microphone, player streaming, or the onboard microphone\u003c\/li\u003e\n  \u003cli\u003eChannel calibration plus ON\/OFF animations and timers\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApp and Remote Control\u003c\/h2\u003e\n\n\u003ch3\u003eBanlanX Bluetooth App\u003c\/h3\u003e\n\n\u003cp\u003eBanlanX pairs over Bluetooth — no WiFi or hub. Because the W die is addressed separately, a plain warm white scene and a full-color effect can live side by side on the same run.\u003c\/p\u003e\n\n\u003ch3\u003eOptional 2.4G Touch Remote and Wall Panel\u003c\/h3\u003e\n\n\u003cp\u003eSP639E also pairs with the optional \u003cstrong\u003eRB3 \/ RC3\u003c\/strong\u003e 2.4G touch remote and 86-type wall panel (sold separately). One remote can drive several controllers, each controller binds up to 5 remotes, and the system supports unified ALL control or 4-zone control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring and Installation\u003c\/h2\u003e\n\n\u003cp\u003eFeed a regulated DC 5-24V supply into the controller input, then wire the strip to the \u003cstrong\u003eVCC \/ DAT \/ GND\u003c\/strong\u003e output terminals as shown on the wiring diagram. RGBW pixel tape draws more current than RGB at the same length — plan power injection on long runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch the supply voltage to the strip: a 24V strip on a 12V supply will look dim, and the reverse will damage it.\u003c\/li\u003e\n  \u003cli\u003eKeep total load inside the controller rating, and add a second supply or a power repeater on long runs.\u003c\/li\u003e\n  \u003cli\u003eMount the controller somewhere ventilated and dry — the housing is IP20 and not for outdoor or damp use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSP639E\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eController Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eSPI RGBW LED Controller\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Lighting\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAddressable RGBW strip (SK6812, WS2814, TM1814 and similar single-wire ICs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBluetooth LE 5.0 + optional 2.4G RF remote (no WiFi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDC 5-24V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAddressable Capacity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eUp to 450 single-wire RGBW driver ICs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Current\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1mA-10mA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eOutput Terminals\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVCC \/ DAT \/ GND\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCompatible Remotes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eRB3 \/ RC3 (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eApp\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBanlanX (iOS 10.0+ \/ Android 4.4+)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFCC ID 2ATV8SP63XE · CE (RED 2014\/53\/EU) · RoHS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eIP20 — indoor, dry locations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e78 × 56 × 20 mm (3.07 × 2.20 × 0.79 in)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eNot Sure Which Model You Need?\u003c\/h2\u003e\n\n\u003cp\u003eThe quickest check is to count the pads on the end of your strip and look for a chip marking. Two pads means single color, three means tunable white, four means RGB, five means RGBW and six means RGBCCT. A marking such as WS2812B, WS2811, SK6812 or WS2805 means the strip is addressable and needs an SPI model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp638e-addressable-rgb-led-controller\"\u003eSP638E Addressable RGB Controller\u003c\/a\u003e if your pixel strip is RGB only.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp634e-rgbw-led-controller\"\u003eSP634E RGBW LED Strip Controller\u003c\/a\u003e if your RGBW strip has no IC and 5 pins.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp63ae-addressable-rgbcct-led-controller\"\u003eSP63AE Addressable RGBCCT Controller\u003c\/a\u003e if your pixel strip is RGB plus warm and cool white.\u003c\/li\u003e\n  \u003cli\u003ePick the \u003ca href=\"\/products\/sp630e-all-in-one-led-controller\"\u003eSP630E All-in-One LED Strip Controller\u003c\/a\u003e if you want one controller that covers every strip type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCertifications and Support\u003c\/h2\u003e\n\n\u003cp\u003eCertified for the US and EU market: \u003cstrong\u003eFCC ID 2ATV8SP63XE\u003c\/strong\u003e (Part 15C, 2402-2480 MHz), \u003cstrong\u003eCE\u003c\/strong\u003e under the Radio Equipment Directive 2014\/53\/EU (EN 300 328, EN 301 489, EN 62368-1, EN 62479), and \u003cstrong\u003eRoHS\u003c\/strong\u003e to 2011\/65\/EU with amendment (EU) 2015\/863. The CE and RoHS attestations cover all thirteen SP63xE models. Copies of the certificates are available on request.\u003c\/p\u003e\n\u003cp\u003eEach unit ships with a printed manual and the BanlanX QR code. If you want the wiring checked against a specific strip before you order, send us the strip spec and we will confirm the match.\u003c\/p\u003e","brand":"Sperll","offers":[{"title":"Default Title","offer_id":49185390690487,"sku":"SP639E","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8828\/0247\/files\/sp639e-addressable-rgbw-led-controller-dimensions.webp?v=1789456526"}],"url":"https:\/\/brighttapeled.com\/collections\/led-controllers.oembed","provider":"BrightTapeLED","version":"1.0","type":"link"}